K2 MOTOR FLUSH 250ml (T371) - Universal Engine Flush

K2 Motor Flush

is a professional engine flush with a proven formula based on cleaning agents, lubricants, and anti-wear additives. It removes carbon deposits, oil sludge, and soot.

It helps dissolve contaminants blocking piston rings, increasing their sealing ability. Well-sealed rings mean increased compression and reduced oil consumption. K2 Motor Flush dissolves even the oldest carbon deposits, sludge, and other impurities in the engine's lubrication system within minutes. It restores full flow capacity to oil channels.

Thanks to its refined formula and high effectiveness, K2 Motor Flush engine flush:

• removes deposits, carbon, oil sludge, and soot from inside the engine
• restores full flow capacity to oil channels
• reduces smoking and the emission of environmentally harmful exhaust gases
• increases power by freeing stuck piston rings
• increases compression in the cylinders
• reduces oil consumption
• quiets the engine, eliminates noise from valve lifters

Engine Flush

K2 Motor Flush can be used in all internal combustion engines – diesel, gasoline, and gas-powered. Special lubricating additives contained in the flush protect the engine against excessive friction that may arise due to oil dilution after adding the flushing agent. K2 Motor Flush is completely safe for the engine.

It is recommended to use K2 Motor Flush engine flush especially in cases of:

• driving on oil older than 12 months
• buying a car with an engine whose history is unknown to us
• mainly using the car in urban mode (city driving, short distances)
• oil burning by the engine (excessive oil consumption)
• excessive "smoking" (black or blue exhaust smoke)
• low compression
• when oil escapes through the crankcase ventilation
• exceeding the recommended oil change interval (driving on used oil)

It is recommended to use engine flush at least once a year, ideally with every engine oil change. This will help keep the engine clean, increase its efficiency, and extend its lifespan. Black deposits can be permanently eliminated with regular use of the product.

One package is sufficient for 4-6 liters of oil. In the case of heavily contaminated engines, the proportion and operating time with the flush can be increased. K2 Motor Flush has been on the market for over 20 years. It has been tested by thousands of workshops at home and abroad. It is considered one of the most effective agents in its category.

HOW TO USE:

1. Engine flushing should be performed immediately before an engine oil change.
2. Before using the agent, check the engine oil level; if it is not correct, top up the oil.
3. Then pour the entire contents of the package into the warmed-up engine.
4. Start the engine and let it run at idle for 10 - 15 minutes.
5. Then turn off the engine and gravitationally drain all used oil from the engine.
6. Change the oil filter to a new one.
7. Pour in the appropriate amount of new oil according to the car manufacturer's recommendations.